Product ID:SUPER BOTTOMKOTE RED, 456
MSDS Date:04/14/1992
FSC:8010
NIIN:00N038383
MSDS Number: BRDYS

INTERNATIONAL PAINT CO INC

2270 MORRIS AVE
UNION, NJ 07083-0386
US

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

10 @ 20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

7 @ 20C

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

2 @ 20C

CAS: 64742-88-7

Fraction By Weight: 5-10%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

COPPER (I) OXIDE (SARA III)

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 60-65%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2MG/M3 FUME;1 DUST

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-5%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:IRRITATION, REDNESS,
TEARING AND BLURRED VISION. SKIN:IRRITATION. MAY RESULT IN
DERMATITIS. HARMFUL IF ABSORBED THROUGH SKIN. INHAL:SEVERE
IRRITATION, DIZZINESS, POSSIBLE NAUSEA AND VOMITIN G AND
UNCONSCIOUSNESS. INGEST:GI IRRITATION, NAUSEA, VOMITING, DIARRHEA
AND UNCONSCIOUSNESS. (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHRONIC:CHRONIC OVEREXPOSURE TO, AND
MISUSE OF, SOLVENTS HAS BEEN LINKED TO PERMANANT BRAIN AND NERVOUS
SYSTEM DAMAGE. INHALATION OF ZINC FUME MAY PRODUCE SYMPTOMS KNOWN
AS METAL FUME FEVER. SYMPTOMS USUALLY DISAPPEAR WITHIN 24 HRS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES:FLUSH IMMED W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MIN. GET MD ATTENTION IMMED. SKIN:REMOVE CONTAMINATED CLOTHING,
WASH SKIN WITH PLENTY OF SOAP & WATER. LAUNDER CLOTHES BEFORE
REUSE. INHAL:R EMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
NEEDED. GET MEDICAL ATTENTION. INGEST:GET MEDICAL ATTENTION IMMED.
DRINK PROMPTLY MILK, EGG WHITES, GELATIN SOLUTION/WATER. AVOID
ALCOHOL.

Flash Point Method:SCC
Flash Point:81F,27.2C
Lower Limits:1% BY VOLUME
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL UNOPENED CONTRS,
BUT MUST NOT BE USED AS AN EXTING MEDIA. (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. CLEAN UP WITH ABSORBENT MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BLDG DESIGNED & PROT FOR
STORAGE OF LIQ W/NFPA CLASS IC.AVOID BRTHG DUST/CHIPS FROM
SANDING/BLASTING SURF COATED W/PROD.
Other Precautions:THIS MATERIAL IS TOXIC TO FISH IF MISUSED, READ
CONTAINER LABEL BEFORE USE.

Respiratory Protection:IN OUTDOORS/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPROVED FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS,
USE A NIOSH/MSHA A PPROVED RESP I/A/W 29 CFR (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOLUME & PATTERN TO KEEP TLV &
LEL OF HAZ INGRED BELOW LIMS SPECIFIED, & TO REMOVE (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG&FULL LNGTH FCSHLD.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING
Supplemental Safety and Health
FIRE FIGHT PROC:TAKE CARE TO PREVENT SPREAD OF BURNING LIQ W/WATER.
CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. RESP
PROT:1910.134 TO REMOVE A COMBO OF PARTICULATES & VAPS.
VENT:DECOMPOSITIO N PRODUCTS DURING WELDING/FLAME CUTTINGON
SURFACES COATED WITH THIS PRODUCT.

Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:2.3
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:17

Stability Indicator/Materials to Avoid:YES
MOISTURE, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARKS. KEEP DRY.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS, COPPER FUMES.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.